Always read the product label before use
- Always use chemically resistant rubber gloves such as
Formby's® Refinishing Gloves
and protective eyewear.
- Work in a shaded, well-ventilated area with temperature
ideally between 65° and 85° F.
- Surface should be thoroughly cleaned. Remove any dirt or wax
build-up before applying Formby's®
Tung Oil Finish.
- Put a small amount of Tung Oil Finish on a Formby's®
Finish Applicator Pad or a soft, lint-free cloth and rub into
the wood. For best results apply a thin coat and work the Tung
Oil into the wood surface, similar to the way you would wax a
- Tung Oil should dry within 12 hours. Buff lightly with a very
fine steel wool pad such as Formby's®
Steel Wool Refinishing Pads. Wipe thoroughly with a soft,
lint-free cloth. Rub in a second coat. To build sheen and add
protection, additional coats may be applied.
DANGER! HARMFUL OR FATAL IF SWALLOWED. COMBUSTIBLE.
Contains ALIPHATIC HYDROCARBONS. Contents are
COMBUSTIBLE. Keep away from heat, sparks and open
flame. May cause eye, skin and respiratory tract irritation. Avoid
contact with eyes and skin. Keep container closed when not in use.
FIRST AID: In case of eye contact, flush thoroughly
with large amounts of water for 15 minutes and get medical attention.
For skin contact, wash thoroughly with soap and water. In case of
respiratory difficulty, provide fresh air and call a physician.
If swallowed, do not induce vomiting. Call Poison Control Center,
hospital emergency room, or physician immediately. Intentional misuse
by deliberately concentrating and inhaling the contents can be harmful
DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN.